Cabinet Pellet Stove

Pleasant Hearth pellet burning stoves will warm your heart and your home with highly efficient and effective indoor zone heating. This stove has been EPA certified with a 85% efficiency rating. Perfect for single-family or mobile home use with little assembly required. All Pleasant Hearth pellet burning stoves feature chrome handles, air wash system for cleaner air, solid cast iron door with large ceramic glass veiwing area, and a 5 year limitied warranty. Stoves operate best when fueled with premium pellet fuel. Heating coverage area is up to 2,200 sq ft.

  • High Efficiency EPA Approved Pellet Burning Stove
  • Burns 25 to 85 hours in one fueling
  • Exclusive Comfort Control System
  • Exclusive Integrated Diagnostics
  • Auto Ignition System
  • Includes Outside Air Kit (MSRP $60)
  • Ceramic glass window
  • Air Wash System
  • Mobile Home Approved
  • Made in the USA
Fuel Type Wood Pellets
Heat Output50,000 BTU/hr
Heating CapacityUp to 2,200 sq. ft.
Log or Pellet Capacity120 lb. Hopper Capacity
Average Efficiency85%
Emissions.69 grams/hour
FinishBlack Finish with Chrome Accents
Dimensions W x D x H (in.)26" x 24" x 35 3/4"
Weight (lbs.)180
Warranty5 Year Limited Warranty
Cabinet Pellet Stove is rated 4.4815 out of 5 by 27.
Rated 4 out of 5 by from Nice Stove I purchased this pellet stove Oct. 2013. Have been using it for about 4 months. ! would've rated it 5 stars... but yesterday the convection blower failed where the bushing sets in the rubber. The rubber came apart in 2 pieces. The stove is cleaned regularly & until now, I've had no issues. However... I don't particularly like the design of this bushing, & rubber, on the end of the blower cage. I hope it's not going to be a constant problem, it's really a NICE Stove, to let such a small part be such a large issue. Stove doesn't run without it. I'm waiting to a get replacement, hopefully under the warranty. But I would still recommend this stove to a friend, or family.
Date published: 2014-03-03
Rated 4 out of 5 by from Awesome stove We actually bought and installed the stove spring of 2014 after the burn season. Started using it in October of 2014 and have loved it ever since. I clean it regularly (weekly for the most part and monthly for some of the other areas) and my home is nice and toasty. We're remodeling and making a lot of repairs so the house right now is drafty but it's still warm even in Michigan winter. My only issue is the noise that started after the most recent monthly cleaning. I'm reading on here that a rubber bushing is probably giving out... I've already emailed the company but I may call them anyway. I still love the stove and would tell anyone to get one... but make sure you get extra bits so you have them on hand!
Date published: 2015-02-19
Rated 4 out of 5 by from Heats the house fine I bought this stove in January 2014. I've had it now for almost a year and as far as heating my 1400 sq ft house, it works fine. It was very easy to install and cleaning it is simple. The only issue I have with it is that it rattles and is very loud. Everyone that comes over always asks me if it is always as loud as it is and they also say it most likely shouldn't be as loud as it is. I have kind of gotten used to it. I am calling the manufacturer on Monday to complain about it. It's becoming annoying.
Date published: 2014-11-30
Rated 4 out of 5 by from Works well if you keep it clean We've had this stove for a year and it has worked well. We set it up in the basement and it keeps the entire space (1100 sq ft) at 70 degrees at about 40% thermostat even on the coldest days. We live in upstate NY and had an unseasonably long and cold winter last year and the stove worked fine. The only problem came when I didn't clean it often and thoroughly enough. We're buying another one for our other house near the Canadian border. Also, Jacob, from Customer Service has been extremely helpful.
Date published: 2014-10-01
Rated 5 out of 5 by from Set it and forget it! Fantastic pellet stove!! I bought the stove in august of 2014 after the previous years propane prices went through the roof. I did allot of research on stoves and read allot of customers reviews whether a 3000. dollar stove or a 1000. dollar stove there was always some negative reviews but pleasant hearth had the least negative and the most positive reviews out of the stoves in this price range. I have been burning the stove since October and it has been great. I am heating a 2500 sq. foot house and I am very pleased with the stove so far it has been flawless. I have an unfinished walk out basement and I am planning on installing another pleasant hearth stove down there next season. I do vacuum my stove out everyday even though I don't need to the cleaner you keep it the better it will perform.
Date published: 2014-12-14
Rated 4 out of 5 by from Loving my new heat source!! I've only had my pellet stove for a months so far and I LOVE IT so far!!! It is very easy to clean and the customers service has been so helpful with just basic questions. I have it in my living room and it heats up the entire first floor which is about 1700 sq ft. The only two minor things I would encourage on a newer model if possible is to be able to change maneuver the vents to face up or down or left or right. Also the blower is a little bit loud but the benefits out way that.
Date published: 2015-02-01
Rated 5 out of 5 by from Great Product! and Even Better support! Bought the PH50CAPS for my 1700 Sq, foot home and it heats it well. My Furnace hasn't turned on since i got it. I bought it almost a year ago and recently it became very noisy. After reading some reviews I have found that a rubber bushing in the convection blower goes bad. I called the customer service number and with out question they told me the part is on its way. Probably the best customer service I have ever dealt with. Thanks again! I woulld recommend any of your products!
Date published: 2014-12-16
Rated 4 out of 5 by from couple of problems not major installed a PH50CAP two years ago, the fire pot needed to be replaced(under warranty) just before starting it for the heating season the stove was covered in rust, looked like it was 10 years old, had to sand an repaint, the factory paint was not good, now the blower motor is making a squeal that will drive you crazy, waiting to hear back from customer support to see if there is a fix. all said and done this stove does one heck of a job heating our house
Date published: 2015-01-04
  • 2015-11-26T07:15CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_131, PRD, sort_relevancy
  • clientName_ghpgroupinc

Can this stove burn corn, cherry pits or other fuels?

Asked by: Firefighter mike
Hello,This stove is only certified to burn pellets.-Customer Service Team
Answered by: Jenn B
Date published: 2015-10-29

Does the stove still work when the power goes out?

Asked by: Richard7220
Hello,Because this stove runs on electricity it would not continue to run if the power were to go out.-Customer Service Team
Answered by: Jenn B
Date published: 2015-10-23

I use 3-In. Diameter DuraVent exhaust pipe w/two 90-deg. elbows & vent cap. I use premium hardwood pellets. Will eliminating elbow's running straight outdoors optimize my stove? I am getting too much black soot in my pipe.

Asked by: BurnPellets
Hello,Eliminating all but 1 elbow, and running piping vertically above the peak of the roof will help to eliminate soot buildup.Also installing the outside air kit will help. We recommend that if you have more than 2 elbows or if overall piping is longer than 15' to move to 4" piping.
Answered by: Jenn B
Date published: 2015-10-13

It says 3" or 4" vent pipe.  What is the actual size of the vent pipe connector on the back of the stove? Also what is the size of the fresh air intake pipe?  Thanks!

Asked by: Gerry
Hey Gerry,The exhaust port on the pellet stove is 3" wide. You will need either 3" or 4" L or PL piping depending on how many elbows and how much rise/run you will have. For additional information, feel free to give us a call at 877-447-4768. Thank you.- GHP Group Customer Service Team
Answered by: GHPCustomerService
Date published: 2015-06-22

Where can i purchase the replacement parts for cabinet style pullet stove PH50CABPS. blower motor need to replaced. 

Asked by: peterpan
Hey Peter Pan,We can provide parts and assistance with your PH50CABPS pellet stove. Please give us a call at 877-447-4768 & have your model # & serial # ready. Thank you.- GHP Group Customer Service Team
Answered by: GHPCustomerService
Date published: 2015-05-12

Where can I get parts 

Asked by: joeman
Hey Joe,You can order parts by giving us a call at 877-447-4768. Thank you.- GHP Group Customer Service Team
Answered by: GHPCustomerService
Date published: 2015-03-06

Where can you buy parts online for PH50cabsp, I need a convection blower???

Asked by: EdF1967
Hey there,We can offer additional parts and troubleshooting by giving us a call at 877-447-4768. Thank you.- GHP Group Customer Service Team
Answered by: GHPCustomerService
Date published: 2015-08-27

Can the cabinet stove be PARTIALLY recessed into an alcove? I'm removing an existing propane fireplace and can line the space with tile/stone. The alcove is about 44"W X 22"D X 55"H. I can increase the height dimension. 

Asked by: KenFrmCA
Hey Ken,We cannot recommend placing your unit in any sort of recessed area. If you would like additional information, feel free to give us a call at 877-447-4768. Thank you.- GHP Group Customer Service Team
Answered by: GHPCustomerService
Date published: 2015-02-05
  • 2015-11-26T07:12CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_131, PRD, sort_recentAnswersFirst
  • clientName_ghpgroupinc
Comfort Control System Demo
REQUIRED Clearance Area for Pellet Stoves