DISCONTINUED Pleasant Hearth - Merrill Electric Media Fireplace - Merlot Finish

Product Videos
Processing...

248-15-71

Pleasant Hearth - Merrill Electric Media Fireplace - Merlot Finish


The Merrill fireplace doubles as an entertainment center for flat panel TVs up to 58 in., and the beautiful traditional styling and hand-applied Merlot finish make this fireplace a focal point in any room. It has built-in ventilation and hidden wire management channels to help keep unsightly wires under control. The fireplace includes a center shelf with two compartments for media components and four storage shelves for accessories hidden behind operational doors on either side of the fireplace. 4600 BTUs of fan forced air heat will heat up to 400 square feet, or use the flame without the heater for 4-season enjoyment. The fireplace comes with three flame adjustments and 10 thermostatic temperature levels. The temperature and timer functions are displayed on the control panel's LCD read-out, and all of the fireplace functions can be operated by the fully integrated remote control.

CSA_logo

Features
  • Completely vent free - just plug it in and turn it on
  • Curved firebox front provides panoramic fire view
  • Realistic flame and randomly glowing ember bed effect
  • 4600 BTU fan forced-air heater heats up to 400 sq. feet
  • Supplemental heating source focuses heat to increase comfort level while reducing energy costs
  • Separate 3-stage flame and 11-stage thermostatic temperature controls
  • Electronic timer with automatic shut -off from 30 minutes to 9 hours
  • LCD back-lit digital display for temperature and timer functions
  • Use with the heater or without for ambiance
  • Multi-function remote control turns unit on and off, adjusts flame, temperature and timer
  • Tempered safety glass front panel stays cool to the touch
Specs
  • Heater Type: Electric
  • Light Source: 2 x 40 light bulbs
  • Watts: 1350
  • BTU Output: 4600
  • Heating Coverage Area (sq. ft.): 400
  • Overall Dimensions LxWxH (in.): 54 x 16 x 36.5
  • Overall Weight (lbs.): 127.76
  • Warranty: 1 Year Limited
Drawings
Pleasant Hearth - Merrill Electric Media Fireplace - Merlot Finish
Click to view full size drawing
FAQs
file:///C:/Users/KyleRamsey/AppData/Local/Microsoft/Windows/INe

Page 1 of 1


Electric Fireplaces FAQ

Problem Possible Cause Corrective Action

1. Make sure the fireplace is


Fireplace does not operate; the ON/OFF power light on the control panel is not lit.


Power light is ON but the back flame is not bright/visible.


Power light is ON but the ember bed flame is not flickering.

  1. The fireplace is not plugged in.

  2. A circuit breaker is tripped or a fuse blown.

  3. Defective ON/OFF switch.

  4. Loose wiring.


  1. Incorrect operation.

  2. LED strip not working.

  3. Loose wiring.

  1. LED strip not working.


    1.


    Rotating flame

    477-4768.

    reflector shaft

    1.

    Open back of firebox and

    Excessive noise when the

    rubbing against

    reposition flame reflector shaft.

    flame is ON but the heater

    housing.

    Turn off unit prior to servicing.

    OFF.

    2.

    Defective flame

    2.

    Call customer service at (877)

    reflector shaft

    477-4768.

    motor.

    1.

    Refer to operating instructions.

    1.

    Incorrect

    2.

    Call customer service at (877)

    operation.

    477-4768.

    2.

    Defective heater

    3.

    Call customer service at (877)


    Heater is not operating.


    3.

    switch. Defective heater


    4.

    477-4768.

    Call customer service at (877)

    assembly.

    477-4768.

    4.

    Loose wiring.

    5.

    Unplug the unit. Clear the louver

    5.

    Dirty or clogged

    area of dust and debris. Wait five

    louver door.

    minutes, plug the unit in again

    and turn on the heater.

    1.

    Dirty or clogged

    1.

    Refer to Maintenance of Motors

    Excessive noise when the

    blower.

    section of Instruction Manual.

    heater is operating.

    2.

    Defective heater

    2.

    Call customer service at (877)

    assembly.

    477-4768.


    1.


    Rotating flame

    477-4768.

    reflector shaft

    1.

    Open back of firebox and

    Excessive noise when the

    rubbing against

    reposition flame reflector shaft.

    flame is ON but the heater

    housing.

    Turn off unit prior to servicing.

    OFF.

    2.

    Defective flame

    2.

    Call customer service at (877)

    reflector shaft

    477-4768.

    motor.

    1.

    Refer to operating instructions.

    1.

    Incorrect

    2.

    Call customer service at (877)

    operation.

    477-4768.

    2.

    Defective heater

    3.

    Call customer service at (877)


    Heater is not operating.


    3.

    switch. Defective heater


    4.

    477-4768.

    Call customer service at (877)

    assembly.

    477-4768.

    4.

    Loose wiring.

    5.

    Unplug the unit. Clear the louver

    5.

    Dirty or clogged

    area of dust and debris. Wait five

    louver door.

    minutes, plug the unit in again

    and turn on the heater.

    1.

    Dirty or clogged

    1.

    Refer to Maintenance of Motors

    Excessive noise when the

    blower.

    section of Instruction Manual.

    heater is operating.

    2.

    Defective heater

    2.

    Call customer service at (877)

    assembly.

    477-4768.

  2. Loose wiring.

plugged into a standard 120V outlet.

  1. Check additional appliances on the circuit; ideally the fireplace should be on a dedicated 15amp circuit.

  2. Call customer service at (877) 477-4768.

  3. Call customer service at (877) 477-4768.

  1. Refer to operating instructions.

  2. Call customer service at (877) 477-4768.

  3. Call customer service at (877) 477-4768.

  1. Call customer service at (877) 477-4768.

  2. Call customer service at (877)


file:///C:/Users/KyleRamsey/AppData/Local/Microsoft/Windows/INetCache/Content.Outlo... 2/3/2016




Copyright © 2018 GHP Group Inc. | Privacy Policy