Dyna-Glo 10K BTU Indoor Kerosene Radiant Heater
Processing...

RMC-55R7B

Dyna-Glo 10K BTU Indoor Kerosene Radiant Heater

$129.99



Dyna-Glo's 10,000 BTU indoor kerosene heater offers a radiant heating solution that can target a specific zone. Creates directional sun-like radiant heat for an area up to 500 square feet for 13 hours on a single tank of fuel. The removable fuel tank allows for simple, spill-free refills while its small space design allows for great versatility. Includes a tip over shut-off system to ensure that you, your family and home are safe.

Kerosene

Radiant

Indoor-Residential

Features
  • Mechanical Tip Shut-Off Assembly
  • Push Button Electric Ignition (Batteries Included)
  • Removable Fuel Tank
  • One Touch Extinguish System
  • Easy-Lift Side Handles
Specs
  • Heater Type: Radiant
  • Fuel Type: 1-K Kerosene
  • BTU Ouput: 10000
  • Igniton Type: Push Button Electric
  • Tank Size (Gal.): 1
  • Operating Time (hrs): 11 to 14
  • Heating Coverage (sq. ft.): 500
  • Dimensions (inches): 11.9x22.3x19.3
  • Weight (lbs.): 25
Drawings
Dyna-Glo 10K BTU Indoor Kerosene Radiant Heater
Click to view full size drawing
FAQs
Indoor Kerosene Heater FAQ
Trouble Corrective Action
Heater Will Not Light:
  1. Fuel Tank is Empty
  2. Water present in kerosene
  3. Ignitor plug fails to glow
  4. Igniter plug makes contact with side of wick
  1. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  2. Drain tank. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  3. Replace batteries. Replace Igniter plug. Check for broken or disconnected wire.
  4. Lower wick using adjuster knob until igniter plug makes contact with top of wick.
Heater Produces Smoke or Odor:
  1. Flame is too high
  2. Heater is in an air draft
  3. Burner is not level
  4. Carbon or tar built up on wick
  5. Contaminated kerosene
  1. Using wick adjuster knob, lower wick to desired ½" flame.
  2. Move heater out of air draft.
  3. Using burner knob, rotate burner from side to side until it seats properly over wick.
  4. Perform "Carbon Removal / Dry Burning" procedure. Replace wick if necessary.
  5. Drain tank. Remove wick assembly & replace wick. Reinstall wick assembly. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
Flames Flickers or Dies
  1. Water present in kerosene
  2. Carbon or tar built up on wick
  1. Drain tank. Remove wick assembly & replace wick. Reinstall wick assembly. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  2. Perform "Carbon Removal / Dry Burning" procedure. Replace wick if necessary.
Wick Burning Down Excessively
  1. Dangerous, volatile fuel mixed with kerosene (gasoline, benzene, alcohol, white gas, paint thinner, camp stove fuel, oil compound)
  1. Drain and clean tank
  • Remove and replace wick
  • Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
Wick Adjuster Sticks
  1. Water present in kerosene
  2. Carbon or tar built up on wick
  1. Drain tank. Remove wick assembly & replace wick. Reinstall wick assembly. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  2. Perform "Carbon Removal / Dry Burning" procedure. Replace wick if necessary.



Copyright © 2017 GHP Group Inc. | Privacy Policy