Dyna-Glo 10.5K BTU Indoor Kerosene Convection Heater
Processing...

WK11C8

Dyna-Glo 10.5K BTU Indoor Kerosene Convection Heater

$119.99



Dyna-Glo's 10,500 BTU indoor kerosene heater brings compact, convection style heat to wherever you need it. Provides ideal supplemental heat for an area of 525 square feet for a 13 straight hours. Features an advanced burner design to create incredible efficiency, which eliminates unwanted odors and gets you max heat from your fuel. Comes standard with a safety tip switch to ensure the flame will go out if the unit is ever knocked over.

Kerosene

Convection

Coverage 525 sq ft

Indoor-Residential

Features
  • Mechanical Tip Shut-Off Assembly
  • Push Button Electric Ignition (Batteries Included)
  • Exclusive Run-Time Fuel Gauge
  • One Touch Extinguish System
  • Convenient Handle Design
Specs
  • Heater Type: Convection
  • Fuel Type: 1-K Kerosene
  • BTU Ouput: 10500
  • Igniton Type: Push Button Electric
  • Tank Size (Gal.): 1.1
  • Operating Time (hrs): 11 to 14
  • Heating Coverage (sq. ft.): 525
  • Dimensions (inches): 12.6x12.6x21.3
  • Weight (lbs.): 14.4
Drawings
Dyna-Glo 10.5K BTU Indoor Kerosene Convection Heater
Click to view full size drawing
FAQs
Indoor Kerosene Heater FAQ
Trouble Corrective Action
Heater Will Not Light:
  1. Fuel Tank is Empty
  2. Water present in kerosene
  3. Ignitor plug fails to glow
  4. Igniter plug makes contact with side of wick
  1. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  2. Drain tank. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  3. Replace batteries. Replace Igniter plug. Check for broken or disconnected wire.
  4. Lower wick using adjuster knob until igniter plug makes contact with top of wick.
Heater Produces Smoke or Odor:
  1. Flame is too high
  2. Heater is in an air draft
  3. Burner is not level
  4. Carbon or tar built up on wick
  5. Contaminated kerosene
  1. Using wick adjuster knob, lower wick to desired ½" flame.
  2. Move heater out of air draft.
  3. Using burner knob, rotate burner from side to side until it seats properly over wick.
  4. Perform "Carbon Removal / Dry Burning" procedure. Replace wick if necessary.
  5. Drain tank. Remove wick assembly & replace wick. Reinstall wick assembly. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
Flames Flickers or Dies
  1. Water present in kerosene
  2. Carbon or tar built up on wick
  1. Drain tank. Remove wick assembly & replace wick. Reinstall wick assembly. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  2. Perform "Carbon Removal / Dry Burning" procedure. Replace wick if necessary.
Wick Burning Down Excessively
  1. Dangerous, volatile fuel mixed with kerosene (gasoline, benzene, alcohol, white gas, paint thinner, camp stove fuel, oil compound)
  1. Drain and clean tank
  • Remove and replace wick
  • Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
Wick Adjuster Sticks
  1. Water present in kerosene
  2. Carbon or tar built up on wick
  1. Drain tank. Remove wick assembly & replace wick. Reinstall wick assembly. Fill tank with water-clear 1-K kerosene or red dyed 1-K kerosene.
  2. Perform "Carbon Removal / Dry Burning" procedure. Replace wick if necessary.



Copyright © 2017 GHP Group Inc. | Privacy Policy